Equipment Applications
Heat Process Applications
Direct Heating Applications
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
412-276-3388
Heat Exchange and Transfer home page
Heat Exchange Applications Inquiry
Heat Exchange and Transfer Service
Request Information or a Quote

Heating Tanks - Direct Heating of Tanks


Direct Heating of Tanks by Heat Exchange and Transfer over the side heaters Circulation heaters Circulation Heaters over the side heaters Flanged Heaters Flanged Heaters UST Heaters Unitary Storage Tank Heaters Open Coil Heaters Open Coil Heaters

 

Additional Information About Direct Heating of Tanks

Equipment Inquiry Forms
Have a Question of Heat Exchange Equipment

  • Principles of Operation
  • Applications
  • Critical Data

The most common and most efficient method of heating tanks is to directly heat the tank contents with an electric immersion heater. Nearly 100% of the electrical energy used by the heater is absorbed by the product inside of the tank. A well-insulated tank requires very little energy to maintain tank temperatures. A variety of heater elements can be utilized depending on the tank design, temperature range and heat sensitivity of the product to be heated. Some elements are installed through openings in the top of the tank and others are installed through nozzles in the side of the tank. Large tanks often utilize elements inside of closed pipe wells to eliminate the need to drain the tank for replacement. When direct immersion is not practical, the fluid can also be pumped through an external heater and returned to the tank.

Nearly every liquid storage tank can utilize a direct electric heater element. Common applications include: water and oil storage tanks, chemical tank farms, railroad terminals, hydraulic reservoirs and pipeline terminals. New tanks have almost limitless options for installation, while existing tanks may require special customized installations.

Properly designing a tank heater requires the following information

  • Properties of the material to be heated 
  • Detailed drawing of the tank with insulation specs. 
  • The quantity and size of available connection ports 
  • The size of the heater is based on the volume of the tank and the heat-up time required.

Click on the Inquiry Forms link for complete system design information.



 

 
 
Copyright © 2010 Heat Exchange and Transfer, Inc.
  Terms of use / Privacy statement