Equipment Applications
Heat Process Applications
Direct Heating Applications
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
412-276-3388
Heat Exchange and Transfer home page
Heat Exchange Applications Inquiry
Heat Exchange and Transfer Service
Request Information or a Quote

THERMAL FLUID HEAT TRANSFER SYSTEMS / WM Series - Compact Design
The WM Series of heat transfer systems is designed for closed loop temperature control of common heat transfer fluids. The WMS Series is similar in design, but includes a parallel cooling circuit. These units are completely packaged systems designed for a maximum operating temperature of either 450°F or 550°F.
Catalog Listing Hot Oil Systems
pdf hot oil system brochure

SPECIFICATIONS:

  • Electrically operated
  • Centrifugal pump
  • 150 lb. flanged construction
  • 208 thru 575 volts, 3 phase
  • WM 450 and WMS 450 series only
    • Temperatures to 450°F
    • 9,18, 27, and 36 kW
    • Flow rates to 40 gpm and 40 psi
  • WM 550 and WMS 550 series only
    • Temperatures to 550°F
    • 9,18, 27, and 36 and 48 kW
    • Flow rates to 80 gpm and 50 psi

WM Series standard components include an electric heater, centrifugal oil circulation pump with mechanical seal, thermal expansion tank (shipped separately), and a control center all mounted on a drip proof base. The WMS Series is constructed using all of the above components with the addition of a shell and tube heat exchanger and three way diverting valve. Each unit is furnished completely piped and wired and includes foam glass insulation on internal piping and heater chamber. The system is given an operating test prior to shipment. WM and WMS Series are available with a variety of standard options listed on page 4 of this bulletin.

 

FEATURES

  • All welded construction
  • Closed cell insulation
  • Drip proof base
  • Sheet metal panels on 3 sides and
    top of system
  • Discharge pressure gauge
  • Water cooled mechanical seal on pump
  • Digital temperature controller
  • High limit device with manual reset on heater circuit
  • Expansion tank shipped loose for mounting at the highest point in the piping system
  • Operating test of system prior to shipment
CLICK ON AN IMAGE BELOW TO VIEW A LARGER IMAGE
STANDARD MODEL SPECIFICATIONS
OPTIONS AND CUSTOM DESIGNS
WM COMPACT FLUID HEAT TRANSFER SYSTEM
specifications for compact fluid heat transfer system
CUSTOM compact fluid heat transfer system

 


 
 
Copyright © 2010 Heat Exchange and Transfer, Inc.
  Terms of use / Privacy statement