Equipment Applications
Heat Process Applications
Direct Heating Applications
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
Heat Inquiry Submittal Forms
412-276-3388
Heat Exchange and Transfer home page
Heat Exchange Applications Inquiry
Heat Exchange and Transfer Service
Request Information or a Quote

SECONDARY LOOP TEMPERATURE CONTROL SYSTEMS / EM Series
The EM series of heat transfer systems is designed for closed loop temperature control of common heat transfer fluids utilizing existing plant steam as the heat source. The EM is a completely packaged system and is usually designed for a maximum temperature of 350°F based on 150 lb. steam supply. However, systems can be designed for higher or lower temperatures based on available steam supply.
Catalog Listing Tempered Water Systems
PDF Temper Control Systems with Water

SPECIFICATIONS:

  • Temperatures to 350°F and higher
  • Steam heated
  • Centrifugal pump
  • 150 lb. flanged construction
  • NEMA 12, 4 or 7
  • Heating capacities to10 million BTU/Hr

High Capacity Heat Transfer Systems

Standard units consist of: steam heat exchanger, proportional steam control valve, steam trap, relief valve, vacuum breaker, centrifugal circulation pump, system isolation valves, strainer, thermal expansion tank (shipped separately) and a complete control center all mounted on a drip proof base. Units are furnished completely wired, piped, insulated, and factory tested prior to shipment. The EM is available with a wide range of options, including systems designed for complex heating and cooling operations.

FEATURES

  • Utilizes plant steam as heat source
  • Insulation of internal piping
  • Drip proof base
  • Mechanical seal on pump
  • Expansion tank open to the atmosphere
  • Heat input controlled by proportional steam valve
  • Steam condensate piping includes trap, blow-down dirt trap and check valve
APPLICATIONS
•REACTORS •PLATENS •EXTRUDERS •LINE TRACING •KETTLES •MOLDS •TANKS •ROLLS
•DRYERS •DIES •EXCHANGERS •PRESSES
CLICK ON AN IMAGE BELOW TO VIEW A LARGER IMAGE
TYPICAL PIPING
AND INSTRUMENT DIAGRAM
OPTIONS AND CUSTOM DESIGNS
KM COMPACT FLUID HEAT TRANSFER SYSTEM
CUSTOM compact fluid heat transfer system

 


 
 
Copyright © 2010 Heat Exchange and Transfer, Inc.
  Terms of use / Privacy statement